Targeting the needs of fixed and mobile broadband, the ATCA-PP81 dual NetLogic XLP packet processing blade provides network equipment providers with Deep Packet Inspection (DPI) capabilities to support advanced “content-aware” routing, policy control and security functions required by next generation multi-service IP networks. Delivering per blade line rates up to 40Gbps, and based on NetLogic Microsystems’ new XLP832, ATCA-PP81 dual NetLogic XLP packet processing blade enables networks to deliver higher quality of service, increased revenue and optimized network efficiency to improve CapEx and OpEx metrics.
The ATCA-PP81 dual NetLogic XLP packet processing blade enables next generation wireless and wireline infrastructure solutions including LTE (Serving Gateway, PDN Gateway and MME), enhanced 3G networks (SGSN, GGSN, Internet Offload) and stand-alone service and policy control devices that scale up to 200Gbps. The dual NetLogic XLP packet processing blade incorporates DPI techniques to extract information on individual traffic flows. With this information operators can deliver service-aware solutions that adapt on a per-service and per-subscriber basis – enabling maximum performance, efficiency and premium service levels.
The ATCA-PP81 dual NetLogic XLP packet processing blade interconnects two XLP832 packet processors, I/O and backplane fabrics using a non-blocking 40G Ethernet switch. Each CPU is provided with four 10Gbps ports to the switch. External I/O is supported over a dual redundant 40GbE backplane fabric (with fallback to 10G) as well as external connections to 10GbE and 40GbE networks. The fabric can also be configured to support multiple 40G interfaces allowing the blade to function as a combined hub / packet processor blade in systems.
Coupled with Radisys’ ATCA systems and Trillium protocol software, ATCA-PP81 dual NetLogic XLP packet processing blade provides the fastest path from application development to deployment revenue. From DPI application such as policy enforcement, network monitoring and security, to Wireless Core Networks, PP81 dual NetLogic XLP packet processing blade is the blade of choice for deploying a wide range of high-performance, scalable telecom applications.
PROCESSING
- Dual NetLogic XLP832 multi-core packet processor
- CPU includes security engines, network accelerators and fast messaging network
MEMORY
- Up to 32GB per CPU (64GB per board)
- On-board Flash memory
CONNECTIVITY
- Base interface compliant to PICMG 3.0 (dual redundant 1GbE)
- Fabric interface compliant to PICMG 10G and 40G standards
- Optional hub switch capability
- I/O supporting 10GbE, 40GbE and 100GbE
HARDWARE ACCELERATION
- XLP832 security engines providing up to 65K RSA operations per CPU
- NL11K-based TCAM Mezzanine (up to 160Mbit)
- NLS2008 Regular Expression Engine (RTM option)
SOFTWARE SUPPORT
- NetLogic Linux & Fast Path SDK, Wind River PNE LE 4.0
- FlowEngine DPI Framework
- NL11K TCAM SDK
- NLS2008 RegEx SDK
- 6WINDGate software framework
- Future Trillium fast path modules
PP81 Block Diagram
CPU / MEMORY
- Dual NetLogic Microsystems XLP832 packet processors up to 1.6GHz
- 8 Multi-threaded MIPS cores per processor
- Integrated security engine including Snow3G, Kasumi, IPsec, etc.
- Up to 32GB memory per CPU
- NL11K-based TCAM mezzanine up to 160Mbit ON-BOARD I/O
- Dual redundant 1GbE base interface
- 10G & 40G Fabric interfaces
- Multiple 10G/40G/100G external IO ports
- RJ45 Management Port
- RJ45 Console Port
SOFTWARE
- Wind River PNE LE Linux 4.0
- NetLogic XLP SDK
– Linux distribution
– Lightweight fast path executive
– Debug & development tools
– Example software and benchmark code - Application software
– FlowEngine DPI Framework
– Trillium fast path control and bearer plane protocols (e.g., SCTP, eGTP, etc.)
– Network and routing protocols including fast path and slow path functions
MECHANICAL & ENVIRONMENTAL COMPLIANCE
- Standard 8U single-slot (6 HP) front board and RTM
- Operating environment:
– Temperature: 0C to +55C
– Humidity: 5%-80% (non-condensing)
– Vibration: 20Hz-2KHz random multi-axis, 0.5G RMS - Storage/transportation environment:
– Temperature: -40C to +85C
– Humidity: 5%-95% (non-condensing)
– Vibration: 20Hz-2KHz random multi-axis, 6G RMS - Assembly components meet UL 94-V0 flammability rating
REAR TRANSITION MODULES (RTM)
- 10GbE SFP+ (8x)
- 40GbE QSFP (2x)
- 100GbE (Active-standby)
REGULATORY COMPLIANCE
- UL 60950-1 Safety of Information Technology Equipment
- IEC/EN 60950-1 Safety of Information Technology Equipment
- FCC Part 15, Subpart B, Class A
- CE Mark - Meets EMC directive 89/336/EEC
- Designed for Telcordia NEBS GR-63-CORE and GR-1089-CORE Level 3
- RoHS 6 / 6 Compliant
Please contact your RadiSys representative today.
Toll–Free: 800–950–0044
Phone: 503–615–1100
Support: 866–385–6167
For more information
(800) 950-0044
For support questions call 1-866-385-6167 or visit support downloads for this product